Cheap antiseptic liquid level transmitter input type level gauge 5M special spot input type level transmitter is based on the principle of hydrostatic and proportional to the height of the liquid measured, using diffused silicon or ceramic piezoresistive sensing element effect, the static pressure will turn into an electrical signal. After temperature compensation and linearity correction. 4-20mADC convert standard current signal output. Sensor input type level transmitter section can be put directly into the liquid part of the available transmitter flange or bracket, installation extremely easy to use. Good stability, high precision liquid level transmitter input directly into the measured medium, very easy to install and use. Solid-state structure, no moving parts, high reliability, long life from the water, the viscosity of the oil to the paste can be carried out with high precision measurements, not measured media bubble, deposition, the electrical characteristics of a wide range of temperature compensation. Input type level transmitter with power reverse polarity protection and overload current limit protection. Measuring range 0 ~ 0.5m ... 50m 12VDC ~ 36VDC power supply output signal 4 ~ 20mA, 1 ~ 5V, 0 ~ 5V, 0 ~ 10V accuracy class ± 0.5% FS, ± 0.2% FS, ± 0.1% FS Temperature drift 0.03% FS / ℃ Zero drift 0.03% FS / ℃ long-term stability of 0.2% FS / year to compensate for temperature 0 ~ 80 ℃ medium temperature -40 ~ 85 ℃ ambient temperature of -40 ~ 85 ℃ 150% overload life> 1 × 1 0 times pressure cycles (2 5 ℃) load resistor R = (U-12.5) /0.02- RD where: U is the supply voltage, RD for the cable resistance Response time ≤1 (10% ~ 90%) ms measuring temperature and the temperature of liquid media corrosive and non-corrosive material PTFE dielectric housing leads directly into or remote Explosion levels ExiaⅡCT6 (optional)